Liqui Moly Engine Clean 500 ml (1883)

Highly effective additive combination for cleaning the engine interior from troublesome deposits before changing the oil. Dissolves sludge and lacquer formers, wraps up solid particles and liquid contaminants and leads them out with the waste oil. A clean engine, which is thus supplied with fresh oil, can perform to its full potential.

This ensures rapid oil penetration, optimal engine performance, minimal wear, and reduced exhaust emissions.

Properties

- prevents lubrication deficit - reduces pollutant emissions

- gentle cleaning

- extremely economical

- does not attack common sealing materials

- quick and efficient cleaning

- environmentally friendly

- simple to use

- tested for turbochargers and catalytic converters

- suitable for diesel particulate filters

Technical characteristics: Color yellow, brownish

Base: additive/carrier fluid Density at 20ºC: 0.82 g/cm³ DIN 51 757

Flash point: 60ºC DIN ISO 2592

Pour point: 45 ºC DIN ISO 3016 Liquid form Viscosity at 40 °C <7 mm²/s Characteristic odor

Areas of application: Suitable for all common engine oils, in gasoline and diesel engines, with and without diesel particulate filter (DPF).

Tested for turbo systems and catalytic converter systems. Add to the warm engine oil before changing the oil.

Instructions for use: Add the additive to the warm engine oil before changing the oil. Let the engine run idle for 10 min. Change the oil and oil filter. One 500 ml dose is sufficient for engines with an oil pan capacity of up to 5 L. The additive is compatible with all commercially available engine oils. Not suitable for motorcycles with wet clutches.