Liqui Moly Pro-Line Engine Flush Solution 500 ml (2427)

Technical Data

Colour / appearance brownish yellow
Base additive in carrier fluid
Density at 20 ° C 0.81 g / cm³ DIN 51757
Boiling point 63 ° C DIN ISO 2592
Pour point -45 ° C DIN ISO 3016
Form liquid
Viscosity at 40 ° C <7 mm² / s

Cleans the engine internally. Removes deposits from oil ports, bearings, piston ring area, etc. Reduces engine noise and oil consumption. Improves compression. Increases vehicle reliability. After the oil change, it allows the freshly introduced oil to be used at maximum efficiency.

Properties

- extremely economical

- Cleans quickly while being gentle on the engine

- suitable for diesel particulate filters

- tested for turbochargers and catalytic converters

- easy to use

- environmentally friendly

- does not attack rubber parts

- fast cleaning

Area of use

Cleaning and flushing of gasoline systems and diesel engines. Improves hydraulic function, e.g., VVT, VANOS and other oil switches and valves. Can be safely used in vehicles with a timing belt in an oil bath.

Application

One 500 ml can is sufficient for a maximum of 5 liters of oil. Add Pro-Line Engine Flush to the engine oil at operating temperature before changing the oil. After adding the product, let the engine idle for approx. 10 - 15 minutes depending on the degree of contamination. Then change the oil and filter. ProLine Engine Flush is compatible with most commercially available engine oils.

Note: Not suitable for use on motorcycles with wet clutches.