Liqui Moly SUPER LEICHTLAUF 10W40 - 5L (9505)

Manufacturer: Liqui Moly
Super Leichtlauf 10W-40
Oil type: Synthetic technology
Viscosity class: 10W-40
Capacity: 5L

It is a modern, low-viscosity engine oil, produced using synthesis technology that ensures smooth engine operation. The oil ensures reduced fuel consumption, protects against wear, keeps the engine clean, and prevents sludge formation. It provides immediate lubrication at cold start. It is used in all seasons for passenger car gasoline and diesel engines, with or without turbo and air cooling system. The synthetic components and specially selected additives allow the oil to be successfully used in vehicles with mileage over 100,000 km, as well as for the most modern engine concepts. It does not attack gaskets, thus ensuring engine sealing.

Properties
- instant lubrication after cold start
- outstanding engine cleanliness
- miscible with all commercially available engine oils
- regenerates seals
- high shear stability
- particularly suitable for vehicles with mileage over 100,000 km
- high lubrication reliability
- saves fuel and reduces pollutant emissions
- maintains seals
- smooth engine operation
- excellent wear protection
- optimal aging stability
- tested for turbochargers and catalytic converters

Specifications and classifications: ACEA A3 ∙ ACEA B4 ∙ API SN ∙ MB-Approval 229.1 ∙ MB-Approval 229.3 ∙ VW 501 01 ∙ VW 505 00
Liqui Moly recommends this product for vehicles with the following specifications: Fiat 9.55535-D2 • Fiat 9.55535-G2 • GWM • HAVAL • MB 229.1 • Peugeot Citroen (PSA) B71 2300 • Renault RN 0700 •
Renault RN 0710 • Wuling

Technical characteristics
SAE class 10W-40 SAE J300
Density at 15°C 0.870 g/cm³ DIN 51757
Viscosity at 40°C 95.5 mm²/s ASTM D 7042-04
Viscosity at 100°C 14.0 mm²/s ASTM D 7042-04
Viscosity at -30°C < 60000 mPas ASTM D 4684
Viscosity at -25°C <=7000 mPas ASTM D 5293
Viscosity index 150 DIN ISO 2909
HTHS at 150°C >= 3.5 mPas ASTM D 5481
Pour point -36°C DIN ISO 3016
Evaporation loss 12.0% (Noack) CEC-L-40-A-93
Flash point 232°C DIN ISO 2592
Total base number 10.8 mg KOH/g DIN ISO 3771
Sulphated ash 1.0 - 1.6 g/100g DIN 51575
Color 2.5 DIN ISO 2049

Area of use: Especially for vehicles with over 100,000 km, as well as for modern gasoline vehicles,
diesel vans and supercharged engines.

How to use:
The operating instructions of vehicle and engine manufacturers must be observed.