Liqui Moly Motor Protect Oil Additive 500 ml (1867)

Manufacturer: Liqui Moly
Code: 1867
Capacity/Volume: 500 ml
Product Type: Car Additive

Fully synthetic engine oil additive. Significantly reduces wear. High-pressure wear protection additives form a very thin, deformable, and self-lubricating film on friction surfaces in the engine under wear conditions, which remains effective for at least 50,000 km. This results in the following advantages: Significant reduction in wear, longer engine life, reduced fuel consumption and emissions due to reduced viscosity, optimal engine power, quiet operation.

Properties
- reduces oil and fuel consumption
- highest thermal stability
- friction and wear reduction
- has a lasting effect
- tested for turbochargers and catalytic converters
- extremely economical
- increases smooth operation

Technical characteristics:
Base: synthetic additives, base oils
Color: red, brown
Flash point: 160 °C - DIN ISO 2592
Pour point: -30°C - DIN ISO 3016
Viscosity at 40°C: 85.5 mm²/s
Form: liquid
Density at 20°C: 0.869 g/ml

Areas of use:
Add AFTER changing the oil with fresh oil. 500 ml is sufficient for up to 5 liters of engine oil. Adding it to fully synthetic oils with reduced friction and viscosity further reduces wear by approximately 35%. Long-lasting effect for 50,000 km
(observe the oil change intervals specified by the vehicle manufacturer).

How to use:
The "Motor Protect" oil additive should be added every 50,000 km during an oil change. It is recommended to use it from the first kilometers of
the engine. One dose of 500 ml "Motor Protect" additive is sufficient for up to 5 liters of engine oil. Reduce the specific oil volume
by 500 ml. For economic reasons, this product is added during or shortly after the oil change. It is completely
compatible with all commercial mineral or synthetic engine oils.